E30 Seat Back Mounting Repair Brackets, Tabs (Sport, Comfort, 4 door, 2 door)

E30 seats are notorious for breaking the bracket that mounts the seat back to the hinge. The factory piece is thin stamped steel with a welded-on nut, and it has two failure points — the 90 degree bend and the welded nut itself. Welding a broken one back together works for a while, but it often re-fails slightly up or downstream of the welds.

These CNC machined billet brackets solve the problem for good. The thread is machined directly into solid billet, so there is no welded nut to crack off and no thin bend to fatigue.

The bracket is completely weldless and mounts through the two existing holes in the hinge — just remove the head of the single factory rivet, push the rivet out, and bolt the new bracket on with the included hardware. No welding, no drilling (other then removing rivet head which can be drilled, chiseled, dremeled, or die grinded).

Fits Sport and Comfort seats from both 2 door and 4 door cars (all except the early 84-85 seats, which use different hinges). Each seat uses two brackets, one per hinge — so order a single bracket if only one side is broken, a set of 2 for one seat, or a set of 4 to do both front seats.

Included: CNC billet bracket(s) with mounting hardware.

Price: $50 per bracket + shipping ($20 US/Canada, $50 international).