Fixing your AC vents so they are no longer floppy is easier than you think.

All you need is:

Flat head screw driver
Nylon washers
20 min

To remove an AC vent all you have to do is point it down until you feel it click, then with a thin screw driver carefully push in each side until you feel it slightly release, then point the vent ever so slightly up and pull it towards you.

Thats it!

Now take your Nylon washers and place them on the two pegs and push the vents be into place!

This entry was posted on April 19, 2021 at 7:45 pm and is filed under Do it Yourself. You can follow any responses to this entry through the RSS 2.0 feed.